Softstringsphone
Download

Basic 1.2.4 · Pro 2.7.9 · Router VPN 1.2.3 · free

Your landline on your phone – through your FRITZ!Box.

Softstringsphone turns your Android phone into a handset for your FRITZ!Box: call and be called with your landline number, with the box’s call list and phone book – or use any SIP account, encrypted even on the go.

Version 1.2.4 · Android 8.0 or later · 2.5 MB · free

Release notes – what’s new?

1.2.4 · Nov 17, 2026

  • VPN setup help: the FRITZ!Box button now has its correct name, “Add (WireGuard) Connection”. It previously said “Add VPN connection”, which is the button on the IPSec tab.

1.2.3 · Nov 15, 2026

  • German: the app now uses the formal form of address („Sie“) in all its texts, hints, the setup and the in-app help. The other languages are unchanged.

1.2.2 · Nov 14, 2026

  • Clearer hints: the option “Via the FRITZ!Box CAPI” now says that #96*3* must be dialled once, and for an emergency call the app says that you only need to tap the call button in the Phone app.
  • VPN setup: the guide now fully describes the confirmation on the FRITZ!Box (a button on the box or the key sequence on a phone) and drops the unnecessary “Use” step after choosing the file.

1.2.1 · Nov 13, 2026

  • French and Spanish: the VPN help and setup now name the Router VPN buttons and the FRITZ!Box menus exactly as they appear there in French and Spanish.

1.2.0 · Nov 12, 2026

  • Android 17: the app asks for access to the local network (Android calls it “Nearby devices”). Without it, it can’t reach your FRITZ!Box at home; a hint in the setup and the settings leads to the permission.
  • Emergency numbers such as 112 are now handed to your phone’s own Phone app – just tap the call button there. The mobile network is the more reliable route for this.
  • Dialling follows the rules of your country: with a country code other than 49, national and international prefixes are now right, e.g. in Italy, Austria or the USA.
  • Start screen: in landscape, number, call button and delete sit next to the keys, with large text the call list stays visible, and on tablets the tabs span the full width.
  • French and Spanish: the app now comes in four languages, chosen at the top of the settings. The microphone in the dial pad also understands numbers in French and Spanish.
  • New in the settings: “Help and support”. “Open help” shows the help on this website in the app’s language, “E-mail support” opens your mail app. “Create diagnostics” collects version, device, settings and logs – without passwords, user names, contacts or call list, with phone numbers shortened to the last three digits; only “Share” passes the file on.
  • Also: the last tab you chose stays after a restart, the box’s call list and phone book reload as soon as the VPN is up, if the box refuses an action the app tells you why, and key tones also get through to SIP providers that offer another format first.

1.1.2 · Oct 20, 2026

  • Hide individual phonebooks of the box: in “Contacts (box)” the “Phonebooks” button opens the selection (checked = shown), e.g. to hide a spam list. The button appears when the box has more than one phonebook.
  • New hint under “VPN to your FRITZ!Box”: older boxes without WireGuard (FRITZ!OS before 7.50) – you can still call on the go with your provider’s SIP credentials, then without the box’s call list and phonebook.

1.1.1 · Oct 19, 2026

  • Help and setup assistant for the VPN now match Router VPN 1.1: “Add connection”, import a file or QR code, “Automatic by network” and the default “Only our apps” · “Home network only”.
  • Smaller text fixes: signing out no longer turns off a VPN, and the hints for when you are away point straight to Router VPN.

1.1.0 · Oct 15, 2026

  • VPN to the FRITZ!Box now via our own free app “Router VPN”. Softstringsphone shows whether a VPN is running and opens Router VPN at the tap of a button.
  • If the box can’t be reached and no VPN is on, the red notice leads straight to the VPN app. As soon as the VPN is up, the app signs in again for incoming calls.
  • The “Set up step by step” assistant now also guides you through installing Router VPN.
  • The VPN settings of the previous version are deleted from the phone – read the box’s QR code into Router VPN once.

1.0.9 · Oct 15, 2026

  • Fixed the crash when opening version 1.0.8.

1.0.8 · Oct 14, 2026

  • Voice input in the dial pad, in search and in the input fields.

1.0.7 · Oct 13, 2026

  • VPN: the box address is hidden and only shown after a tap.

1.0.4 – 1.0.6 · Oct 12, 2026

  • New step-by-step assistants for the IP phone and the VPN; the VPN now comes as a downloaded file.
  • Two ways to sign out: just sign out (data stays) or sign out and delete data.
  • VPN back on after a restart; warning with sound and a red bar when calls cannot come in.
  • Texts corrected in all languages.

1.0.1 – 1.0.3 · Oct 12, 2026

  • Built-in VPN to the FRITZ!Box (WireGuard) for calls on the go.
  • Answer calls, hide your number, SIP over IPv6.
  • New design based on the app icon, light and dark.

1.0.0 · Oct 11, 2026

  • First version: call through the FRITZ!Box (CAPI) or a SIP account, encrypted with TLS and SRTP, the box’s call list and phone book.
  • Free
  • No ads
  • Encrypted with SIP providers (TLS + SRTP)
  • No account, no cloud
CAPI, the call list and the phone book of the box require a FRITZ!Box. Over SIP the app also works without a FRITZ!Box – with any SIP account.
New: Router VPNOur free VPN app safely connects Basic and Pro to your FRITZ!Box when you’re out and about. →
Securely connectedSIP over TLS · voice over SRTP

Two editions

Basic or Pro – the choice is yours.

Both apps make calls with the same proven core via your FRITZ!Box or any SIP account. Pro adds on-device AI, fax and automations on top. Both are free and ad-free – you can even install them side by side. On the go, our free app Router VPN connects both to your FRITZ!Box.

Basic

Softstringsphone

free · ad-free

Lean, fast and secure: everything a good handset for your FRITZ!Box needs.

  • Calls via CAPI or SIP with your landline number
  • Call list and phone book of your FRITZ!Box
  • Incoming calls even on the lock screen
  • SIP over TLS + SRTP, on the go via Router VPN
  • Favourites, T9 search, phone contacts
  • Number, search and input fields by voice
  • Small app: about 2.5 MB
Download Basic (APK)

Version 1.2.4 · Android 8.0 or later · 2.5 MB

SHA-256 247a0b8c01eae47be69dae9c34a3f29bad87ed2258de37e7750d7fff30653137

Release notes – what’s new?

1.2.4 · Nov 17, 2026

  • VPN setup help: the FRITZ!Box button now has its correct name, “Add (WireGuard) Connection”. It previously said “Add VPN connection”, which is the button on the IPSec tab.

1.2.3 · Nov 15, 2026

  • German: the app now uses the formal form of address („Sie“) in all its texts, hints, the setup and the in-app help. The other languages are unchanged.

1.2.2 · Nov 14, 2026

  • Clearer hints: the option “Via the FRITZ!Box CAPI” now says that #96*3* must be dialled once, and for an emergency call the app says that you only need to tap the call button in the Phone app.
  • VPN setup: the guide now fully describes the confirmation on the FRITZ!Box (a button on the box or the key sequence on a phone) and drops the unnecessary “Use” step after choosing the file.

1.2.1 · Nov 13, 2026

  • French and Spanish: the VPN help and setup now name the Router VPN buttons and the FRITZ!Box menus exactly as they appear there in French and Spanish.

1.2.0 · Nov 12, 2026

  • Android 17: the app asks for access to the local network (Android calls it “Nearby devices”). Without it, it can’t reach your FRITZ!Box at home; a hint in the setup and the settings leads to the permission.
  • Emergency numbers such as 112 are now handed to your phone’s own Phone app – just tap the call button there. The mobile network is the more reliable route for this.
  • Dialling follows the rules of your country: with a country code other than 49, national and international prefixes are now right, e.g. in Italy, Austria or the USA.
  • Start screen: in landscape, number, call button and delete sit next to the keys, with large text the call list stays visible, and on tablets the tabs span the full width.
  • French and Spanish: the app now comes in four languages, chosen at the top of the settings. The microphone in the dial pad also understands numbers in French and Spanish.
  • New in the settings: “Help and support”. “Open help” shows the help on this website in the app’s language, “E-mail support” opens your mail app. “Create diagnostics” collects version, device, settings and logs – without passwords, user names, contacts or call list, with phone numbers shortened to the last three digits; only “Share” passes the file on.
  • Also: the last tab you chose stays after a restart, the box’s call list and phone book reload as soon as the VPN is up, if the box refuses an action the app tells you why, and key tones also get through to SIP providers that offer another format first.

1.1.2 · Oct 20, 2026

  • Hide individual phonebooks of the box: in “Contacts (box)” the “Phonebooks” button opens the selection (checked = shown), e.g. to hide a spam list. The button appears when the box has more than one phonebook.
  • New hint under “VPN to your FRITZ!Box”: older boxes without WireGuard (FRITZ!OS before 7.50) – you can still call on the go with your provider’s SIP credentials, then without the box’s call list and phonebook.

1.1.1 · Oct 19, 2026

  • Help and setup assistant for the VPN now match Router VPN 1.1: “Add connection”, import a file or QR code, “Automatic by network” and the default “Only our apps” · “Home network only”.
  • Smaller text fixes: signing out no longer turns off a VPN, and the hints for when you are away point straight to Router VPN.

1.1.0 · Oct 15, 2026

  • VPN to the FRITZ!Box now via our own free app “Router VPN”. Softstringsphone shows whether a VPN is running and opens Router VPN at the tap of a button.
  • If the box can’t be reached and no VPN is on, the red notice leads straight to the VPN app. As soon as the VPN is up, the app signs in again for incoming calls.
  • The “Set up step by step” assistant now also guides you through installing Router VPN.
  • The VPN settings of the previous version are deleted from the phone – read the box’s QR code into Router VPN once.

1.0.9 · Oct 15, 2026

  • Fixed the crash when opening version 1.0.8.

1.0.8 · Oct 14, 2026

  • Voice input in the dial pad, in search and in the input fields.

1.0.7 · Oct 13, 2026

  • VPN: the box address is hidden and only shown after a tap.

1.0.4 – 1.0.6 · Oct 12, 2026

  • New step-by-step assistants for the IP phone and the VPN; the VPN now comes as a downloaded file.
  • Two ways to sign out: just sign out (data stays) or sign out and delete data.
  • VPN back on after a restart; warning with sound and a red bar when calls cannot come in.
  • Texts corrected in all languages.

1.0.1 – 1.0.3 · Oct 12, 2026

  • Built-in VPN to the FRITZ!Box (WireGuard) for calls on the go.
  • Answer calls, hide your number, SIP over IPv6.
  • New design based on the app icon, light and dark.

1.0.0 · Oct 11, 2026

  • First version: call through the FRITZ!Box (CAPI) or a SIP account, encrypted with TLS and SRTP, the box’s call list and phone book.
Pro · New

SoftstringsphonePRO

free · ad-free

Phone, PDF, fax and assistant in one app – the AI runs exclusively on your phone.

  • Everything in Basic
  • Voice button everywhere: dictate and control – calling and sending only after “yes”
  • Live captions and live translation during calls
  • Call notes: who does what by when
  • Call screening blocks spam, optionally in the box’s call barring
  • Noise suppression and Opus HD audio
  • Fax section, ten PDF tools and an assistant that understands commands
  • FRITZ!Box setup in one tap, webhooks, Tasker and CRM
Download Pro (APK)

Version 2.7.9 · Android 8.0 or later, 64-bit · 56.1 MB

SHA-256 f758418ec515c8ba5c55f12c98cbf699cafc3ca281ef7ed95cb7745c1630d71b

Release notes – what’s new?

2.7.9 · Nov 17, 2026

  • VPN setup help: the FRITZ!Box button now has its correct name, “Add (WireGuard) Connection”. It previously said “Add VPN connection”, which is the button on the IPSec tab.

2.7.8 · Nov 15, 2026

  • German: the app now uses the formal form of address („Sie“) in all its texts, the fax area, the help and the answers of the local AI. The other languages are unchanged.
  • In German, the assistant’s “For you” area is now called „Für Sie“ instead of „Für dich“.

2.7.7 · Nov 14, 2026

  • 64-bit phones only: Pro now contains only the libraries for 64-bit processors (arm64). On 32-bit phones the fax modem and the local AI were missing; Google Play and the Galaxy Store no longer offer Pro there. Nothing changes on 64-bit phones.

2.7.6 · Nov 14, 2026

  • Clearer hints: the option “Via the FRITZ!Box CAPI” now says that #96*3* must be dialled once, and for an emergency call the app says that you only need to tap the call button in the Phone app.
  • VPN setup: the guide now fully describes the confirmation on the FRITZ!Box (a button on the box or the key sequence on a phone) and drops the unnecessary “Use” step after choosing the file.

2.7.5 · Nov 13, 2026

  • French and Spanish: the VPN help and setup now name the Router VPN buttons and the FRITZ!Box menus exactly as they appear there in French and Spanish.

2.7.4 · Nov 13, 2026

  • See at a glance what is switched on: filter and option buttons that are on are now filled in Pro blue and show a tick – in the fax area (for example the inbox filters, and the sending route and time when sending) and in the rest of the app (for example translation during a call or the app lock timeout).
  • Tidier fax area: the fax start page no longer shows a “Call list” link, and the voice command “call list” no longer opens anything there. You will find the FRITZ!Box call list as usual under “Phone” at the bottom.

2.7.2 · Nov 9, 2026

  • New in the settings: “Help and support”. “Open help” shows the help on this website in the app’s language, “E-mail support” opens your mail app with a message to us.
  • “Create diagnostics” collects version, device, settings and logs for support – without passwords, user names, contacts, call list, notes or faxes, with phone numbers shortened to the last three digits. You see everything first; only “Share” passes the file on.

2.6.5 – 2.7.1 · Nov 6, 2026

  • Together with your PC: Pro pairs with Fritten&Fax for Windows – photograph the QR code or type in a code, no account, no cloud (Settings → “More features” → “PC (companion)”). With Fritten&Fax Pro on the PC: fax through the PC, the PC’s fax inbox, contact sync, scanning for the PC.
  • App lock with fingerprint, face or screen lock. When it is on, notifications on the lock screen and the widget show no senders.
  • Send faxes and documents by email: To, Cc, Bcc, templates, signature and attachments; combine PDFs, compress them or protect them with a password; send later. Mail goes out via your own mail server or your mail app. Automatic forwarding of new faxes now goes to several recipients, with the result for each fax.
  • French and Spanish: interface, help, announcements to callers, call assistant, notes, assistant and voice commands.
  • Sending faxes: pages already confirmed are not sent twice, the cover page shows “Recipient fax number” and “Sender fax number”, long messages continue on extra pages, and the transmission report can include all pages sent.
  • Privacy: the call assistant's greeting is now only spoken by a voice installed on your phone. If the voice was not installed, the text could previously go to the text-to-speech service (for example Google), including the name you entered. If the voice is missing now, the built-in announcement without a name is used.
  • Also: dialling follows the rules of your country, emergency calls are handed to the phone’s own phone app, and faxes on the go now also work through Router VPN over mobile data.

2.6.4 · Oct 24, 2026

  • FRITZ!Box fax storage: faxes the box sent itself (copies starting with “Send_” in the fax folder) no longer appear as received faxes – no notification, no email forwarding and no “fax.received” webhook for them, and not in the assistant either.
  • Such copies from earlier checks are removed from the app. Nothing is changed on the box itself.

2.6.3 · Oct 23, 2026

  • Help and setup assistant for the VPN now match Router VPN 1.1: “Add connection”, import a file or QR code, “Automatic by network” and the default “Only our apps” · “Home network only”.
  • The help now correctly says that Pro sends and receives faxes on the go only on Wi-Fi (with the VPN); plus more precise labels in several help topics.

2.6.2 · Oct 20, 2026

  • Hide individual phonebooks of the box: in “Contacts (box)” the “Phonebooks” button opens the selection (checked = shown), e.g. to hide a spam list. The button appears when the box has more than one phonebook.
  • New hint under “VPN to your FRITZ!Box”: older boxes without WireGuard (FRITZ!OS before 7.50) – you can still call on the go with your provider’s SIP credentials, then without the box’s call list and phonebook.
  • Hidden phonebooks no longer count as known numbers for call screening and the assistant.
  • New hint in the AI section: calls are never recorded as audio; a transcript and notes only exist with captions on and are found under “Recent” at the notes icon.

2.6.1 · Oct 18, 2026

  • Faxes no longer ring as a call: if you send a fax to one of your box’s own numbers (e.g. the test fax), Pro no longer shows a call for it. Without a phone number entered, this also applies to the second fax number from the fax settings.
  • The settings now explain which number goes where: your phone number under “How to call”, the fax numbers in the fax settings.

2.6.0 · Oct 17, 2026

  • New: captions optionally with the app’s AI speech pack (AI on the phone → Recognition for captions). It recognizes both sides separately, so speakers are assigned reliably, and it does not depend on the system’s recognition service – captions, notes and the call assistant now also work on Android 12 and older. Everything stays on the phone.
  • If your microphone picks up the other side (speakerphone, echo), a sentence still appears only once in the transcript.
  • Call assistant: the full transcript is collapsed and opens with one tap – the caller’s request is already shown in the assistant’s card. In call notes, Copy and Delete are now in the ⋮ menu so the title fits on narrow phones.

2.5.0 · Oct 17, 2026

  • New: consent by pressing 1 (AI on the phone → call notes). Instead of the announcement with the option to object, the other party is asked to agree by pressing 1; without 1 nothing is transcribed, and pressing 9 stops the transcript at any time. Time, key and version of the announcement are stored in the note as proof. The announcement with the option to object remains the default.
  • During a call, “Ask for consent” also asks for consent in individual calls.
  • Call assistant with a key spam filter: callers who want to be connected press 1. Without a key press, the assistant says goodbye politely and notifies you silently with the number and what was said – nothing is blocked.
  • The app recognizes the other party’s key presses on the phone – as a tone in the call (FRITZ!Box via CAPI) or as a key event via SIP. If the app is not in German, the privacy policy opens in English.

2.4.2 · Oct 16, 2026

  • The transcription notice is now built into the app and plays on every phone – even without an offline text-to-speech voice. The other party hears it even while your microphone is muted.
  • The call assistant now answers even without an offline voice (with the built-in greeting without a name); its announcements have been corrected.
  • Captions: nothing said gets lost anymore when recognition restarts, and nothing reappears after “Stop transcript”.

2.4.1 · Oct 16, 2026

  • New under Settings → Security and privacy: “Downloaded data” – AI speech pack, local AI and call notes with size or count at a glance, deleted with one tap.
  • When downloading the speech pack or the local AI, the app already tells you how to delete it again.

2.4.0 · Oct 16, 2026

  • Fair transcription: when notes are saved, the other party hears a notice at the start and can object – “Stop transcript” ends it right away and discards everything recognized.
  • Notes can also be saved for a single call and are deleted after 90 days (adjustable: 30 days, 1 year or never).
  • Before automatic captions, notes and the call assistant, a short notice explains what to keep in mind; the call assistant tells callers that their answer is only shown as text.
  • Answers from the local AI are labelled and can be sent to us with “Report answer”.
  • Privacy policy and legal notice right in the app, plus clear notices before data leaves the phone (fax forwarding, webhooks, automation apps).

2.3.1 · Oct 15, 2026

  • Safeguarded against a crash at startup as a precaution (the same R8 rule as in Basic 1.0.9).

2.3.0 · Oct 15, 2026

  • VPN to the FRITZ!Box now via our own free app “Router VPN”. Pro shows whether a VPN is running and opens or installs Router VPN at the tap of a button.
  • No camera permission any more: the box’s QR code is now read by Router VPN.
  • The VPN settings of the previous version are deleted from the phone – read the box’s QR code into Router VPN once.

2.2.001 · Oct 15, 2026

  • The voice button now sits on the right of the bottom bar.
  • Assistant: the “online” label no longer covers the microphone and send buttons.

2.2.0 · Oct 14, 2026

  • Voice agent: one microphone for the whole app. It dictates into any field and understands commands such as “call”, “send fax” or “inbox”.
  • Calls and faxes are only sent after you confirm with “yes”.
  • Speech recognition on the phone with an AI speech pack; online recognition only with your consent.
  • “Voice command” tile in quick settings.

2.1.0 · Oct 14, 2026

  • Fritten&Fax is built in as the fax section: switch between phone, fax and assistant at the bottom.
  • AI assistant on the phone: understands typed and spoken commands and suggests what is due.
  • New PDF section.

2.0.0 · Oct 13, 2026

  • First Pro version: live captions and translation during calls, call notes and a call screening assistant – the AI runs on the phone.
All differences compared

Comparison at a glance

BasicPro
Calls via FRITZ!Box (CAPI/SIP) or SIP provideryesyes
Encrypted: TLS + SRTPyesyes
Home network on the go (VPN)with Router VPNwith Router VPN
Box call list and phone bookviewedit & sync
Live captions and translationnoyes
Call notes with tasks and datesnoyes
Call screening and spam protectionnoyes
Noise suppressionnoyes
Voice codecG.711Opus HD + G.711
IP phone in the box at the push of a buttonnoyes
Send and receive faxesnoyes
Assistant for commands and help (offline, optional local language model)noyes
Webhooks, Tasker/MacroDroid, “Open in CRM”noyes
PDF tools: scan, merge, sign, compress …noyes
Block list and FRITZ!Box call barringnoyes
Find the FRITZ!Box automaticallynoyes
Phone processorall (32 and 64 bit)64 bit (arm64)
Voice inputdial pad, search, fieldseverywhere + voice agent
Pricefreefree

Pro: captions need either Android 13+ with offline speech recognition or the app’s AI speech pack, which also works on Android 12 and older. Translation needs Android 12+ with the system’s offline language packs. The optional language model (1.1 GB) is only downloaded on request and by default only over Wi-Fi; you can untick this (“Download on Wi-Fi only”).

Home network on the go

Call on the go just like at home – with Router VPN

Our third app builds an encrypted WireGuard tunnel from your phone to your own router. This lets Softstringsphone and Softstringsphone Pro reach your FRITZ!Box over mobile data too – with your landline number, call list and phone book, just as if you were at home.

New · for Basic & Pro

Router VPN

free · ad-free

A lean WireGuard VPN for your own router. One switch – and your phone is on your home network.

  • Encrypted tunnel to the FRITZ!Box or any other WireGuard router
  • Set up by QR code, file or text – read on the phone
  • Quick settings tile, “Always-on VPN”, back on after a restart
  • Reconnects by itself when the router gets a new internet address
  • No account, no ads, no tracking, no third-party server
  • Basic and Pro show whether the VPN is running and open Router VPN at the tap of a button
  • You decide what goes through the tunnel: by default only our apps and only the home network – the rest of the internet stays fast. Plus automatic rules by network
Download Router VPN (APK)

Version 1.2.3 · Android 8.0 or later · 17.6 MB

SHA-256 19621e47fdfe566bd26ea3f2222387975fcbac1894d69b2643fc11af21978367

Release notes – what’s new?

1.2.3 · Nov 17, 2026

  • Setup help: the FRITZ!Box button now has its correct name, “Add (WireGuard) Connection”. It previously said “Add VPN connection”, which is the button on the IPSec tab.

1.2.2 · Nov 15, 2026

  • German: the app now uses the formal form of address („Sie“) in all its texts, the setup help and the explanations. The other languages are unchanged.

1.2.1 · Nov 14, 2026

  • More precise privacy notes: the app now describes exactly how it recognises your home – only with “Automatic by network” and only with a FRITZ!Box.
  • Clearer help: the connection test it describes now also works with the default “Only our apps”, and the FRITZ!Box guide explains both ways to confirm (a button on the box or the key sequence on a phone).

1.2.0 · Nov 13, 2026

  • Router VPN now also speaks French and Spanish: all texts of the app, the setup help and the explanations.
  • Choose the language in the menu at the top right under “Sprache / Language / Langue / Idioma”. Without your own choice, the app follows your phone’s language.

1.1.1 · Oct 18, 2026

  • The app now only asks your router for its device ID when “Automatic by network” is on.
  • Softstringsphone Pro is always recognised with “Only our apps”.

1.1.0 · Oct 18, 2026

  • New: you decide what goes through the VPN – only our apps (recommended), selected apps, all except exclusions, or all.
  • Where to: home network only – the internet stays direct and fast – or everything through your connection at home, e.g. on open Wi-Fi.
  • Automatic by network: own rules for mobile data, other Wi-Fi and at home, where the VPN can rest. Home is recognised by your router, without location access.
  • For pros: additional address ranges, DNS, MTU and keepalive.
  • Existing connections stay as before until you accept the recommendation.

1.0.1 · Oct 17, 2026

  • New app icon: the shield with the phone handset – matching our phone apps Softstringsphone and Softstringsphone Pro.

1.0.0 · Oct 15, 2026

  • First version: WireGuard VPN from your phone to your own router at home – to the FRITZ!Box or any other WireGuard server.
  • Set up by QR code (read on the phone), settings file or text; the setup help shows every step on the FRITZ!Box.
  • Several connections, one on at a time; quick settings tile, “Always-on VPN” and back on after a restart.
  • If the router stops answering (e.g. after the daily reconnect), the app reconnects by itself.
  • No ads, no analytics, no account; the settings are stored encrypted on the phone only.

Set up in three minutes

  1. Install Router VPN – from Google Play, the Galaxy Store or here as an APK. In Softstringsphone, “Install VPN app” takes you straight to Router VPN.
  2. On the FRITZ!Box: Internet → Permit Access → VPN (WireGuard) → “Add (WireGuard) Connection” → “Connect a single device” → “Next”, enter a name (e.g. Router VPN) and click “Finish”. The box asks for confirmation: press a button on the box or, on a phone connected to the box, dial the key sequence shown. The box then shows a QR code and a settings file – this page appears only once, so keep it open.
  3. In Router VPN tap “Add connection”: scan the QR code on your computer screen or choose the downloaded file wg_config.conf.
  4. When you’re out, turn on the switch in Router VPN – Router VPN shows “Connected”. Softstringsphone shows “VPN active” under Settings → “VPN to your FRITZ!Box” and signs in for incoming calls right away.

Why a separate app?

Google Play only allows Android’s VPN interface in apps whose main purpose is a VPN. That’s why the tunnel now lives in Router VPN instead of the phone apps. For you, only the place of the switch changes: Basic and Pro are among the apps Router VPN sends through the tunnel by default, and automatically call through it.

Good to know

At home on Wi-Fi you don’t need the VPN. The MyFRITZ!App or the “WireGuard” app work just as well. If your line has no public IPv4 address of its own (DS-Lite, common with cable), the VPN only works if your mobile network supports IPv6.

All about the VPN: how it works, privacy, setup and help →

Which edition?

Which edition suits you?

Tick what matters to you – the recommendation updates instantly.

Recommended: Softstringsphone

The basic edition has everything for calling via your FRITZ!Box – small, fast and on any Android phone from 8.0.

Download Basic (APK)

Softstringsphone Pro in detail

Nine areas that turn your phone into an office

At the bottom of the app you switch between Phone · PDF · Fax · Assistant. Each area keeps its state when you switch – and everything works together.

Voice agent

One button that listens everywhere

The voice button floats above every area. Tap and speak: if a field has the focus, you dictate into it – otherwise the visible screen understands the command, then the app, then the assistant.

  • Dictation into every input field – also via the mic in the field: digits become a number, a name in a number field becomes the contact's number, “at” and “dot” an e-mail address, “comma” and “new line” punctuation.
  • Commands that fit the page: on the dial pad “zero four seven one …”, “favorites”, “search Miller”; on “Send fax” “recipient Musterbau”, “subject offer”, “message …”, “scan”, “send”.
  • In control: calling, sending a fax and test faxes only happen after confirmation – the agent asks and listens right away for “yes” or “no”.
  • With several matches it asks “Who exactly?” – “the second one” or the name is enough.
  • Always within reach: drag the button anywhere, it rises with the keyboard; long-press opens the assistant; “Voice command” tile in Quick Settings and an app shortcut.
  • Same recognition as in the assistant: AI speech pack on the phone, online recognition only with consent (shown as “online”) or the phone's offline recognition.
In the appVoice button bottom left in every area · “Voice command” tile in Quick Settings
RequirementVoice input set up (“Set up voice input” guides you on the first tap). During a call the microphone belongs to the call.

Try it

How the assistant understands you

Type a command or pick an example. The preview shows what the assistant in Pro makes of it – a simulation on this page, nothing is sent.

Examples

The examples are made up. In the app the assistant finds names in favourites, history, contacts, fax address book and the box's phone book.

The assistant's answer appears here.

Why Softstringsphone?

The phone you carry anyway, as a handset for your FRITZ!Box.

Your landline number on your mobile

Calls with your landline number – anywhere on your Wi-Fi, in the garden, in the basement. No extra DECT handset needed.

Private, not a platform

No account, no server in between, no analytics, no ads. The app talks only to your FRITZ!Box or your SIP server.

Made for the FRITZ!Box

Call list and phone book come straight from the box; over CAPI the app makes calls on your home network – just dial #96*3* once on a phone connected to the box.

Honestly secure

SIP over TLS, voice over SRTP, passwords in the Android keystore – and no silent fallback to unencrypted calls.

How it works

From your phone via the FRITZ!Box into the phone network

Softstringsphone connects to your FRITZ!Box via CAPI or SIP – or via SIP directly to your phone provider – and calls over your regular line.

1

Set up

Enter the address, user name and password of your FRITZ!Box – the app tests the connection right away. Without a box: “Without FRITZ!Box (SIP only)”.

2

Choose a route

CAPI for your home network (dial #96*3* once on a phone connected to the box), or SIP: your phone as an IP phone on the box, or a SIP account from your provider.

3

Make calls

Type a number or pick one from the lists. Incoming calls ring as usual – even when the screen is locked; full screen over it – from Android 14 only once you tap “Allow full-screen calls” in the settings.

Features

What Softstringsphone does

Everything a good phone needs – neatly arranged in one app.

Dial pad always at hand

The dial pad stays visible at the bottom. Long-press 0 for “+”, long-press the number to paste from the clipboard.

All lists in one place

Recent, favourites, call list and phone book of the FRITZ!Box plus your phone’s contacts – as tabs above the dial pad.

Found in no time

As you type, the app searches all lists – by digits or by name using the letters on the keys (T9).

Take calls

Incoming calls ring with ringtone and vibration, full screen even over the lock screen – from Android 14, tap “Allow full-screen calls” in the settings once for this. Missed calls are reported.

Encrypted calls

SIP over TLS with certificate checks, voice over SRTP. A green padlock during the call shows that everything is encrypted.

CAPI or SIP

Two routes: the FRITZ!Box CAPI on your home network, or SIP – as an IP phone on the box or directly with a provider, also on the go.

Hide your number

Call without showing your number if you like: the “Hide my number” switch applies to all calls, plus a configurable dial code per route. On the go via SIP, your number may still be shown. Emergency calls (e.g. 112) are excluded.

Your own name over SIP

A display name of your choice for the phones on the same FRITZ!Box or with the same provider.

During a call

Mute, speaker, keypad (DTMF) and call duration. At your ear, the proximity sensor turns the screen off.

Dial from other apps

Phone number links and “Dial” from other apps land in the dial pad – the call only starts when you tap.

Light, dark, four languages

Appearance automatic, light or dark; the app speaks German, English, French and Spanish. It starts in your phone’s language (otherwise English); switch it at the top of the settings under “Display and language” (“EN ▾”).

Phone and tablet

In landscape and on large screens the lists are on the left and the dial pad on the right.

A look inside

Tidy, fast, light or dark

Lists at the top, dial pad at the bottom, big buttons during a call – the views follow this page’s appearance.

Start: lists and dial pad
Call via a SIP provider: encrypted with TLS + SRTP
Incoming call – even on the lock screen

Schematic illustration of the app; names and numbers are examples.

CAPI or SIP

Three ways to make calls

You switch the route in the app. Which one fits depends on where you make calls and which phones should ring.

CAPIFRITZ!Box on your home networkSIP via the FRITZ!BoxPhone as IP phoneSIP providerdirectly, without a box
Setupdial #96*3* onceadd an IP phone in the boxprovider’s credentials
Usable on the govia Router VPN to the boxvia Router VPN to the boxyes
Encryptionstays on your home networkhome network (UDP)TLS + SRTP
Incoming callsyes – the box’s phones ring tooyes, like a phone of its ownyes
Let only the mobile ringnoyes (set in the box)yes
Call list & phone book of the boxyesyeswith FRITZ!Box access
Hide your numberyes (dial code *31#)at home via CAPI (#96*3*), on the go it may be shownyes (“Privacy: id”)

Encrypted via TLS + SRTP only if the SIP server offers it; the FRITZ!Box offers no TLS to its IP phones. The “SIP provider” column only applies if your provider issues SIP credentials for an additional device. Whether a provider actually hides your number is up to the provider. Normal call charges of your plan apply.

Security

Secure without you having to think about it

Every statement here is implemented in the app and backed by tests.

Passwords in the keystore

Passwords for the FRITZ!Box and SIP are encrypted with AES-256-GCM; the key lives in the Android keystore and never leaves it.

TLS + SRTP without fallback

If the certificate is wrong or SRTP is missing, the call ends with a clear message – not a single unencrypted voice packet goes out.

Box certificate pinned

Call list and phone book only over HTTPS. The app remembers your box’s certificate and rejects any other before sending credentials.

CAPI on the home network only

CAPI has no encryption of its own – so the app only uses it with addresses on your home network, never over the internet.

No cloud backup

Nothing from the app ends up in backups or is transferred when you switch devices. “Sign out and delete data” removes credentials, key, history and favourites.

No tracking

No ads, no analytics libraries, no usage data sent to us. The published app writes phone numbers to no log.

Encrypted notes

In Pro, call notes and transcripts are stored AES-256-GCM-encrypted on the phone; the key stays in the Android keystore.

AI without a network

Captions, translation, call assistant and the optional local AI compute on the device – there is no online recognition for them. Only voice input (assistant microphone, voice button) can use the system's online recognition, after your consent. No audio is stored.

Installation

Set up in a few minutes

  1. Install Softstringsphone from Google Play or the Galaxy Store – or download the APK file here and open it on your phone.
  2. Only if you install the APK from this page: Android asks once whether your browser or file manager may install apps (“Allow from this source”). Google Play Protect may show a warning because the file doesn’t come from a store – verify it with the checksum below.
  3. Start Softstringsphone and enter your FRITZ!Box details (e.g. fritz.box, user name, password) – or choose “Without FRITZ!Box (SIP only)”. The FRITZ!Box user needs the rights “FRITZ!Box Settings” and “Voice messages, fax messages, FRITZ!App Fon and call list”; “Allow access for applications” must also be switched on in the box (Home Network → Network → Network Settings), otherwise the call list and phone book stay empty. After setup, the app asks for notifications and the microphone. From Android 17, Android also asks – right at the first start – for “Nearby devices” (local network). Please allow it: without this permission the app can’t reach the box.
  4. In the settings under “How to call”, choose the route: with a FRITZ!Box, CAPI is preset – for this, dial #96*3* once on a phone connected to the box; for SIP, set the encryption under “Security”. Outside Germany, enter your country code under “Dialing” in “Your country code (without +)” (49 by default). So that calls also arrive in standby, tap “Turn off battery optimization”; from Android 14 also tap “Allow full-screen calls”, so that calls appear over the lock screen.

Requirements

  • Android 8.0 or later with a microphone
  • A FRITZ!Box – or any SIP account (then without the box’s call list and phone book)
  • For CAPI and the FRITZ!Box as SIP server: phone on the box’s home network, on the go via Router VPN (free)
  • App language German, English, French or Spanish

For CAPI: enable it once on the FRITZ!Box

#96*3*

On a phone connected to the FRITZ!Box, dial this sequence and hang up. Disable with #96*2*.

For SIP: add your phone as an IP phone on the FRITZ!Box

  1. Open the FRITZ!Box interface (fritz.box) → Telephony → Telephony Devices → “Configure New Device”.
  2. Choose “Telephone (with and without answering machine)”, then “LAN/WLAN (IP telephone)”, and give it a name.
  3. Set a user name and password and choose the number for outgoing and incoming calls.
  4. In the app: under “How to call” choose “Via SIP”, enter fritz.box as the server and these credentials, and under “Security” choose “Unencrypted (UDP)” – the traffic stays on your home network.

Guides

Step by step to every feature

The most important setups, short and complete. In Pro you'll find 38 more guides right in the assistant – with “Start now”.

Calling on the go with Router VPNBasic & Pro
  1. Install Router VPN (see above) – in the app, Settings → “VPN to your FRITZ!Box” → “Install VPN app” takes you straight there.
  2. On the FRITZ!Box: Internet → Permit Access → VPN (WireGuard) → “Add (WireGuard) Connection” → “Connect a single device” → “Next”, enter a name (e.g. Router VPN) and click “Finish”. The box asks for confirmation: press a button on the box or, on a phone connected to the box, dial the key sequence shown. The box then shows a QR code and a settings file – this page appears only once, so keep it open.
  3. In Router VPN tap “Add connection”: scan the QR code on screen or choose the settings file.
  4. On the go, turn it on in Router VPN – Router VPN shows “Connected”, and in Softstringsphone or Pro, Settings → “VPN to your FRITZ!Box” shows “VPN active”. With “Always-on VPN” it stays on after a restart too.
  5. Tip: “Set up step by step” in the settings walks you through everything and shows at the end whether the VPN is on.
Reliably reachable – even in standbyBasic & Pro
  1. Settings → “Accept incoming calls” must be on (default).
  2. Settings → tap “Turn off battery optimization” and confirm.
  3. Allow notifications: the silent “Ready for calls” notification keeps the connection open.
  4. Allow full-screen notifications so calls appear over the lock screen.
  5. If the app can't be reached for a minute, it warns you with a sound and a red bar.
IP phone in one tapPro
  1. Open Settings → “More features” → “FRITZ!Box automation”.
  2. Once the FRITZ!Box address, user and password are saved in the settings, tap “Set up IP phone automatically”.
  3. If the box asks for confirmation: press the button on the box or dial the code shown on a phone.
  4. The app creates a user and a 20-character password, switches to SIP and checks the registration – done.
Set up captions and translationPro
  1. Settings → “More features” → “AI on the phone”.
  2. Turn on captions – automatically in every call or via a button during the call.
  3. If the offline language pack is missing, the app offers the download; then everything works without a network.
  4. For translation, the system's offline translator downloads the pack for your language.
  5. Want notes? Under “Call notes”, turn on “Save notes after every call” (off by default). After the call they are in “Recent” via the note icon.
Turn on the call assistantPro
  1. Open Settings → “More features” → “Call assistant” and under “When should the assistant answer?” choose e.g. “Unknown and withheld numbers” – by default it is set to “Never”.
  2. Optionally enter your name for the greeting – it is spoken with an offline text-to-speech voice, otherwise the built-in greeting without a name is used.
  3. Optionally have spam numbers also blocked in the FRITZ!Box call barring.
  4. If only the phone should be involved, use SIP – over CAPI the assistant answers for the whole box.
Send your first faxPro
  1. Choose “Fax” at the bottom – if the box is set up in the phone, the fax section is already logged in.
  2. Tap “Send fax” and pick the recipient from the fax address book, the box's phone book or contacts.
  3. Add a document: “Scan page” (then “Automatic”, “Straight A4 (photo)” or “Picture from the gallery”), “Choose file” or share it from another app.
  4. Optionally choose a cover page and send – the send report is then under “Sent”.
Load the local AI (optional)Pro
  1. Open “Assistant” at the bottom – the “Local AI” card appears at the top.
  2. Download (1.1 GB; “Download on Wi-Fi only” is preselected and can be unticked); the file is checked with SHA-256.
  3. Afterwards the assistant also understands free-form sentences – computed on the phone, without a network.
  4. Delete it any time with “Delete AI” in the “Local AI” card (after the download, the card is at the bottom of the assistant) or under Settings → “Security and privacy” → “Downloaded data”.
Webhook with Home AssistantPro
  1. In Home Assistant create an automation with a Webhook trigger and note the webhook ID.
  2. In the app: Settings → “More features” → “Interfaces” and enter the address, e.g. http://192.168.178.20:8123/api/webhook/softstringsphone
  3. Optionally enter a secret – then every message carries an HMAC signature.
  4. Choose events and tap “Send test” – the result appears right below.
Use voice commands everywherePro
  1. Tap the voice button (mic bottom left) – the first time, “Set up voice input” helps you choose the recognition.
  2. Say a command, e.g. “call Erika”, “fax to Musterbau”, “favorites” or a number. Tap again = done speaking.
  3. To dictate, tap into a field (or use the mic in the field) and speak – the text goes straight into the field.
  4. If the agent asks back (“Send the fax now?”), just say “yes” or “no” – or tap the button.
  5. On the go: add the “Voice command” tile to Quick Settings – it opens the app and listens right away.
Choose the box phonebooksBasic & Pro
  1. Open “Contacts (box)”.
  2. Tap “Phonebooks” at the top – the button appears when the box has more than one phonebook.
  3. Checked = shown. Uncheck e.g. a spam list, then “Done”. At least one phonebook stays visible; in Pro, hidden numbers no longer count as known.

Requirements

What each feature needs

Most features run on any Android phone from 8.0. For some AI features, Pro uses the offline services of newer Android versions.

FeatureEditionRequirement
Calls via FRITZ!Box or SIPbothAndroid 8.0 or later, a FRITZ!Box with telephony or a SIP account
CAPIbothCAPI over TCP on the box (#96*3*), phone on the home network or via VPN
On the go with the FRITZ!BoxbothRouter VPN (free) and the FRITZ!Box's WireGuard VPN (FRITZ!OS 7.50 or later). Older box without WireGuard: call on the go via your provider's SIP account, then without the box's call list and phonebook
Softstringsphone Pro overallProAndroid 8.0 or later, 64-bit processor (arm64)
Live captionsProAndroid 13 or later with offline speech recognition – or the app's AI speech pack (also older Android versions)
Live translationProAndroid 12 or later with offline translator and language pack
Call assistantProFor a greeting with your name: an offline text-to-speech voice (otherwise built-in announcement)
Voice input in the assistantProAI speech pack, online recognition with consent or the phone's offline recognition (Android 12+)
Local AIProAbout 1.5 GB free storage (download 1.1 GB, Wi-Fi only by default) and at least 3 GB of RAM
FaxProA FRITZ!Box with fax function (CAPI, on the home network or via VPN) or a SIP number – at the box or directly with a provider
IP phone in one tapProA FRITZ!Box user with access to the box settings, confirmation on the box if asked
Voice inputBasicThe phone's speech recognition (e.g. Google's); for voice input the app needs no microphone permission – it only needs that for calls
Voice agent (Pro)ProAI speech pack, online recognition with consent or the phone's offline recognition (Android 12+)

Help

When something doesn't work

The most common stumbling blocks and how to fix them. In Pro the assistant answers the same questions right in the app.

The phone doesn't ring for calls

Check “Accept incoming calls” and turn off battery optimization. Over SIP, the IP phone in the FRITZ!Box must respond to the right number under Telephony → Telephony Devices; over CAPI, CAPI over TCP must be on (#96*3*). A red bar in the app shows when it can't be reached.

SIP says the registration failed

User name and password are those of the IP phone, not of the FRITZ!Box interface. Enter fritz.box as server and on the home network choose the unencrypted (UDP) connection. In Pro, “IP phone in one tap” does all of this for you.

The box's call list or phone book stays empty

On the go, turn on the VPN in Router VPN first. The FRITZ!Box user needs access to telephony. If the box has a new certificate (e.g. after a reset), the app refuses the connection for security reasons – then tap “Trust certificate again” in the settings and “Save”.

The call drops when I leave the Wi-Fi

Without VPN only the registration renews; a running SIP call may drop. With a VPN to the box (Router VPN) it stays up – provided the VPN is already on when you leave the Wi-Fi. With “Automatic by network”, the VPN rests at home by default (“Rest”) and only starts on the go; a call begun at home can then still drop.

The other side hears noise or keyboard clicks

In Pro, under “Audio & network”, set noise suppression to “Normal” against hiss and steady noise or to “Strong” against keyboard clicks. Good Wi-Fi reception always helps; via a SIP provider with Opus, Pro adjusts the bitrate by itself.

Captions don't appear

Captions need Android 13 and the offline language pack of the call language – or the app's AI speech pack (AI on the phone → Recognition for captions), which also runs on older phones. The app tells you what's missing and offers the download. While captions are shown, the screen stays on at your ear.

A fax doesn't go out

Open the send report under “Sent” – it names the reason. For sending via CAPI, CAPI over TCP must be on and the phone connected to the home network or via VPN. After a failure the assistant suggests the report or a call under “For you”.

Both phone and fax section react to a fax call

Analogue faxes sometimes arrive as voice (3.1 kHz). Enter an own number in the phone settings so it only listens to that one, and the fax number in the fax section.

Android warns during installation

The APK comes directly from this page. Allow installation from this source and verify the file with the SHA-256 checksum below.

The voice button dictates instead of listening for a command

An input field still has the focus (a pen then shows on the button). Leave the field or close the keyboard and tap again – or simply say the command in the assistant's field.

Router VPN says “The router is not answering”

Check your mobile internet and whether the VPN access still exists on the FRITZ!Box (Internet → Permit Access → VPN (WireGuard)). The app keeps trying by itself and reconnects after the router gets a new internet address. Test with Wi-Fi turned off. On DS-Lite lines the mobile network needs IPv6.

My FRITZ!Box has no WireGuard (IPSec only)

WireGuard comes with FRITZ!OS 7.50; Router VPN only uses WireGuard. First check whether an update is available for your box. Otherwise call on the go with your provider's SIP credentials instead of the box, provided your provider issues SIP credentials for an additional device – the phone then rings without a VPN, only the box's call list and phonebook are not available away from home. The app shows this hint under “VPN to your FRITZ!Box”.

“Contacts (box)” shows entries I don't want to see (e.g. a spam list)

The app shows all phonebooks of the box together. Use “Phonebooks” (at the top of “Contacts (box)”; in Pro, “FRITZ!Box contacts”) to hide individual phonebooks – from Basic 1.1.2 and Pro 2.6.2.

I can't find a recording of my call

The apps never record audio. Pro only writes a transcript and notes when captions are on during the call – afterwards in “Recent” at the call's notes icon. Without captions, nothing is created.

Questions & answers

Frequently asked questions

CAPI or SIP – which should I use?

CAPI is the quickest to set up (dial #96*3* once) and works on your home network. SIP is worth it if only the mobile should ring, if you want to call directly via your provider on the go, or if you don’t have a FRITZ!Box. For SIP on the FRITZ!Box, an assistant in the settings guides you step by step through adding the IP phone and tests the sign-in at the end. It appears under “How to call” as soon as “Via SIP” is selected (“Set up as an IP phone on the FRITZ!Box, step by step”).

Do all phones ring on an incoming call?

Over CAPI the app learns of incoming calls (in parallel with your phones): the FRITZ!Box phones keep ringing and the mobile rings as well. If only the mobile should ring, set it up as an IP phone (SIP) and choose in the FRITZ!Box under Telephony → Telephony Devices which devices respond to which number.

Does the app work on the go?

With a SIP account from your provider, yes – encrypted if you like. For CAPI and the FRITZ!Box as SIP server, the phone connects to the box via VPN when you’re out – set up by our free app “Router VPN” (see above). Set it up once: install Router VPN, on the FRITZ!Box open Internet → Permit Access → VPN (WireGuard) → “Add (WireGuard) Connection” → “Connect a single device”, then in Router VPN tap “Add connection” and scan the QR code or choose the settings file. After that a switch there is all it takes – with “Automatic by network” it even happens by itself. In its settings under “VPN to your FRITZ!Box”, Softstringsphone shows whether a VPN is running and opens Router VPN at the tap of a button; if the box can’t be reached and no VPN is on, the red notice leads straight to the VPN app. If the app can’t be reached for calls for a minute, it warns you with a sound and a red bar. The MyFRITZ!App or the “WireGuard” app works as well. An assistant in the settings (“Set up step by step”) guides you through every step and shows at the end whether the VPN is on.

Why do calls sometimes not arrive in standby?

For incoming calls the app keeps a connection open. Android slows apps down in standby, so turn off battery optimisation for Softstringsphone (button in the settings). There is no push service – that’s the price of keeping third-party servers out.

Can I hide my number?

Yes, with the “Hide my number” switch under “Dialing” – it applies to all calls. Over CAPI the app dials a configurable code before the number (default: *31#). For an IP phone (SIP), the FRITZ!Box does not reliably hide the number. So if the FRITZ!Box is set up in the app and CAPI is switched on with #96*3*, the app automatically places calls with a hidden number via CAPI on your home network. On the go the call goes via SIP, and your number may be shown. With a SIP provider the app sends “Privacy: id”; whether it works is up to the provider. Emergency calls (e.g. 112) are excluded.

Which name does the person I call see?

Your own SIP name is only shown on phones on the same FRITZ!Box or with the same provider. Into the landline and mobile networks only the number is sent; a name appears there only from the callee’s phone book or a caller-ID service.

What does Softstringsphone cost?

Nothing – no ads, no subscription, no account. Calls only incur the normal charges of your phone plan or SIP provider.

Where does my data end up?

Only on your phone and with your FRITZ!Box or SIP provider. The app sends no usage data, needs no server of ours and excludes itself from cloud backups – only Pro downloads the AI speech pack from this website if you want it. This website shows ads from Google and counts visits; cookies and personalised ads only if you agree in the consent window.

Why does Android warn me during installation?

The easiest way is to install the app from Google Play or the Galaxy Store – then Android doesn’t ask. If you install the APK from this page instead, the file doesn’t come from a store: that’s why Android asks for permission and Google Play Protect may show a notice. The SHA-256 checksum on this page lets you verify you have exactly the published file.

Can I try the app without a FRITZ!Box?

Yes: enter “demo” as the address on first start. The app then shows sample data without connecting to a box.

What about emergency calls?

The app hands emergency numbers such as 112 to your phone’s own Phone app – just tap the call button there. For emergency calls your phone’s mobile network is the more reliable route, for example when Wi-Fi or power fails. Only if the device has no Phone app, such as a tablet without a SIM, does the emergency call go through your own line – then always with your number shown and without a code for hiding it.

Does it work with other routers?

CAPI and the box’s call list and phone book require a FRITZ!Box. Over SIP, Softstringsphone works with any SIP account – for example from a phone provider or a PBX that offers IP phones.

Can I install basic and Pro at the same time?

Yes, they are two separate apps. For incoming calls, though, only one of them should have “Accept incoming calls” switched on – otherwise both register with the same account.

Does Pro send my calls to a cloud?

No. Captions, translation, notes and call assistant only use the phone's offline services or the app's AI speech pack; the optional local AI computes on the device. Audio is never stored, notes are kept AES-256-encrypted on the phone.

Does Pro run on every phone?

Pro needs Android 8.0 or later and a 64-bit processor (arm64) – practically every phone of recent years has one. For older 32-bit devices there is the basic edition.

I used Fritten&Fax – are faxes taken over?

Pro is a separate app; there is no migration. Set up fax settings, cover pages, fax address book and e-mail forwarding once again. The faxes on the FRITZ!Box of course stay there.

What does Pro cost?

Nothing – like the basic edition it's free, ad-free, without subscription and without an account.

How big is the local AI and do I need it?

It's optional. Without it the assistant works with rules and understands all commands and how-to questions. With it (Qwen2.5-1.5B, 1.1 GB) it also understands free-form sentences. It is only downloaded on request and can be deleted any time.

Can I operate the apps entirely by voice?

Pro has a voice button above every area: it dictates into any field and understands commands that fit the page – from dialling to “subject …” to “send”. Calling and sending only happen after your “yes”. The basic edition has voice input in the dial pad, the search and the input fields via the phone's speech recognition.

Is my voice recorded or sent to a cloud?

The apps store no audio. Pro recognises speech with the AI speech pack entirely on the phone; it only uses the system's online recognition if you explicitly agree – the button then shows “online”. The basic edition uses the speech recognition set on your phone.

Why doesn’t Softstringsphone have a built-in VPN any more?

Google Play only allows Android’s VPN interface in apps whose main function is a VPN – a phone app with a built-in tunnel is rejected. Since Basic 1.1.0 and Pro 2.3.0 our free app Router VPN builds the tunnel instead. Both apps are among the apps Router VPN sends through the tunnel by default and automatically call through it. The app deletes the settings of the old built-in VPN when it updates; read the FRITZ!Box QR code or file into Router VPN once.

Does Router VPN also work without Softstringsphone or with other routers?

Yes. Router VPN is a standalone WireGuard VPN for your home network – for network storage or your smart home, too – and works with any WireGuard server: FRITZ!Box, OpenWrt, GL.iNet, UniFi, Synology or a server of your own. All it needs are the router’s WireGuard settings as a QR code, .conf file or text.

Can I hide individual FRITZ!Box phonebooks?

Yes, in both apps: tap “Phonebooks” in “Contacts (box)” and uncheck. Hidden phonebooks – such as a spam list – no longer appear in the list; in Pro their numbers also no longer count as known for call screening and the assistant.

My FRITZ!Box is older and has no WireGuard – can I still call on the go?

Yes, via SIP: enter your phone provider's SIP credentials instead of the FRITZ!Box, provided your provider issues SIP credentials for an additional device. You then call with your landline number anywhere, even without a VPN. The box's call list and phonebook are not available this way. Router VPN does not support an IPSec VPN.

Download

Ready? Set up in two minutes.

One APK, no account, no ads. During setup the app tests the connection to your FRITZ!Box right away.

Download Basic (APK)

Checksum (SHA-256): 247a0b8c01eae47be69dae9c34a3f29bad87ed2258de37e7750d7fff30653137To verify on Windows: certutil -hashfile Softstringsphone-1.2.4.apk SHA256 · on Linux/macOS: sha256sum Softstringsphone-1.2.4.apk

Good to know

From the store

Softstringsphone, Softstringsphone Pro and Router VPN are on Google Play and in the Galaxy Store. Store versions update automatically; with the APK from this page, install updates via the new APK – your settings are kept.

Want all the extras?Softstringsphone Pro – phone, fax and AI without the cloud.Download Pro (APK)
Need your home network on the go?Router VPN – free, connects Basic and Pro to your FRITZ!Box, encrypted. Download Router VPN (APK)

Transparency

Traceable and verifiable

Softstringsphone only uses the Android and Kotlin libraries listed below. Telephony, SIP, SRTP, CAPI, G.711 and the jitter buffer are the app’s own code, checked by more than 80 automated tests.

Libraries used
ComponentLicenceProject
AndroidX (Core, AppCompat, Activity, Lifecycle)Apache-2.0Project page
Jetpack Compose, Material 3Apache-2.0Project page
Kotlin-StandardbibliothekApache-2.0Project page
kotlinx.coroutinesApache-2.0Project page
Additionally in Softstringsphone Pro

For fax, PDF, audio and AI, Pro brings further free libraries – all of them run on the phone.

ComponentLicenceProject
Bouncy CastleMITProject page
Concentus (Opus)BSD-3-ClauseProject page
PDFBox-AndroidApache-2.0Project page
WorkManager (AndroidX)Apache-2.0Project page
SMBJApache-2.0Project page
sherpa-onnxApache-2.0Project page
ONNX RuntimeMITProject page
spandsp, libtiff (Fax-Modem)LGPL-2.1, libtiffProject page
llama.cppMITProject page
Qwen2.5-1.5B-Instruct (optional)Apache-2.0Project page
NVIDIA STT DE FastConformer Hybrid Large (optional)CC BY 4.0Project page
NVIDIA Parakeet TDT 0.6B v3 (optional)CC BY 4.0Project page
Silero VAD (optional)MITProject page
Router VPN

Router VPN uses the official WireGuard library for the tunnel; ZXing reads the router’s QR code right on the phone – without Google Play services.

ComponentLicenceProject
WireGuard tunnel (com.wireguard.android:tunnel)Apache-2.0Project page
ZXing core (QR-Code)Apache-2.0Project page
CameraX (AndroidX)Apache-2.0Project page
AndroidX, Jetpack Compose, Material 3Apache-2.0Project page
Kotlin-Standardbibliothek, kotlinx.coroutinesApache-2.0Project page
Checksums (SHA-256) of the downloads

All downloads, images and legal pages of this site with size and SHA-256. The same list as a file: SHA256SUMS.txt

FileSizeSHA-256
RouterVPN-1.2.3.apk17.6 MB19621e47fdfe566bd26ea3f2222387975fcbac1894d69b2643fc11af21978367
Softstringsphone-1.2.4.apk2.5 MB247a0b8c01eae47be69dae9c34a3f29bad87ed2258de37e7750d7fff30653137
SoftstringsphonePro-2.7.9.apk56.1 MBf758418ec515c8ba5c55f12c98cbf699cafc3ca281ef7ed95cb7745c1630d71b
bilder/apple-touch-icon.png23 KBb710776116ae4c78e37b570c4fc0e9e0f9d76e72c90635e71461fcfad6714198
bilder/favicon-32.png2 KB8d819d697e685d79eb45823ce22c4c45ffceb158cc9b62449e7f0bd8b5ddf6a3
bilder/icon-192.png38 KB9165de089516f7d3e7ac5df894f6e66c7a46d327115becd5ef7ceee96f5365c5
bilder/icon-512.png252 KB9176c1b4389837f87abf17ddabd3ad0ed1351f8ef114707ec81fe4a671c0eb8b
bilder/logo-64.png6 KBe53351f4f139c301069779bf2ce6d3d4beaaf42dea3deeef49e4385aa5c8bcf0
bilder/router-vpn.png9 KB1d05936eb2493f260f00319ffa42aa3af7c6f607abccf4fa8839e87a14261683
bilder/vorschau.jpg53 KBd737405ef7b7cb6c1ccd9e4d89921e801a2cc8ff3c1ec045013bff93e2ffa3a2
bilder/vpn/de-01-verbunden.webp19 KB0970b8e8482a6736b2af96e4ad46a01a3ff718d0547de356ab64d550abfb09a4
bilder/vpn/de-02-hinzufuegen.webp16 KBfe87fae30e479cd7a2ab2e2b25582650f5f9e7ea1d65f3b612488985b767300e
bilder/vpn/de-03-hilfe.webp30 KB5c0359f4eb0e6524eeeabb257b492f668fb24a62eff55a392f7229c665e98505
bilder/vpn/de-04-erklaerung.webp24 KBa6ad9678d5363c4804c7c73a5569bf8a9baa3ed2259fdde6ac44db764242ae04
bilder/vpn/de-05-einstellungen.webp21 KBddcfad49bca99703232f3a62c8787fc6ded007e271914e4c5e9808a8260c0d80
bilder/vpn/en-01-verbunden.webp17 KBf9193fde85bcebe41342974db3a47c3ab36b9b8bafdd220706f97a6c6aefeb34
bilder/vpn/en-02-hinzufuegen.webp13 KB4831f2015839e068b0b2303be0b719459eef2108cdc68b52a755ea5a9b0c0028
bilder/vpn/en-03-hilfe.webp31 KB2e90bc794016564544af359a059f858fbb94d4b4cb7ab2c252e8f195868176ec
bilder/vpn/en-04-erklaerung.webp24 KBa6d6a1ab5b9273228fac6ba238e68403a9094bbed0cadc72b26fb77a515fe658
bilder/vpn/en-05-einstellungen.webp21 KBd53c1d641bd564797f182225250c189e08c0acc4fe0f79adf08e2fcf2730296f
bilder/vpn/es-01-verbunden.webp19 KB2e769b45ff222b0c79b767fe7a41615f14ef69f1702ba6cfdee620d8125a2d30
bilder/vpn/es-02-hinzufuegen.webp14 KB37342bb28da6bac3a910547d5d2ab60058b50d357ddbba285cbd73c9b48967f3
bilder/vpn/es-03-hilfe.webp31 KB7afaf5287481b9569a722867131be2338fc80b951e219c2384683cb94c7fe9cd
bilder/vpn/es-04-erklaerung.webp25 KB26de4a7f83a486bf55e3571424745ec56fcdd524bb756a42401b4ef78cc571e9
bilder/vpn/es-05-einstellungen.webp21 KB791332a14f0c391e75a9ecbaf5abc8556571544fca36fa27e471617a8db78773
bilder/vpn/fr-01-verbunden.webp20 KBd6064dc310e814528e007696e53287e4a8c2cff446b03ddaf1b456b3cb13e8a8
bilder/vpn/fr-02-hinzufuegen.webp16 KB0c9ccf4730d8c31ecc76c3b0bc46a1c96c667c6a468f70ba6a7d939761e11874
bilder/vpn/fr-03-hilfe.webp31 KB993260386398294eb3e5d2bede992282a6cf2bd790c47141175f71350b83bd16
bilder/vpn/fr-04-erklaerung.webp25 KBd1369ae2d7f6d0845054ceba1a2c570f68da3351c4949a2cd2873d3458ac1cbe
bilder/vpn/fr-05-einstellungen.webp21 KB8a25cde67dab19d8bb0ce28e0a526d7052ac6b880fc0f0612fc99d11fc2f1a67
datenschutz.html46 KBacfa244e79292b413bb82282dcfcbfeedbdb47621674c332b1183f4cbd23588f
favicon.ico7 KBbf8bb2a87addb5ed2dad7593f6d1b65e5f62d4bef7e7910c60e8c6c16cf3aafd
impressum.html9 KBb9d4558bb8ffb6ed84e474461992edbd7a1d727c94c260f3cb01282322a0596d
privacy.html43 KBce5dfe325c7caa76eea6c8d938d2d0c5212a7b1aaa5a8eb2860c2c443c75e6d7